5 Tips To Removing Mold And Mildew Stains

At some point, you’ve dropped a wet bib between the car seats, and forgotten about it only to find it over a week later and coated in mildew. Or you happened to leave wet towels in the kitchen hamper for a couple of days just to see them covered in mold. Such occurrences are quite regular but rectifiable.

Mold and mildew are particularly hard to eliminate. However, if you choose to adopt the tips below, you’ll give yourself a fighting chance at removing these stubborn stains.

You’ll note that some of the recommendations are harsh chemicals and others are natural ways to eradicate mold and mildew.

1. Vinegar  

Even though you can dilute the vinegar with water to lessen the pungent smell, vinegar works best when used as a mold- killer when it’s shot straight from the bottle onto the trouble area. Leave the cloth or surface for a few hours, and scrub off the mold with a brush.

In the case that the scent of vinegar perturbs you, add drops of essential oil, otherwise, realize that the strong odour subsides after a few hours.

Studies have proved that white vinegar eradicates 82% of mold spores, bacteria, and viruses. Vinegar also safeguards against mold when sprayed on surfaces and left to dry.

2. Hydrogen peroxide

Spatter three-percent hydrogen peroxide onto the moldy area and leave it for around 10 minutes. Scrub the area until its clean then wipe using a damp cloth to eliminate remaining mold spores. You may use vinegar and hydrogen peroxide together, however, put away the bottle in a pitch-black area as light tends to break down the efficacy of hydrogen peroxide.

3. Borax

Using borax as a mold removing agent comes with numerous perks. One, borax is a naturally occurring cleaning product, and albeit toxic if swallowed, borax doesn’t radiate chemicals or harmful fumes like most mold killers.

A white powder, with a PH of roughly 9 and low in toxins, borax comes out as an ideal mold remover.

Other uses of borax include; cleaning drains and toilets, as a fungicide, herbicide, and insecticide it can also be mixed dissolved in water to kill mold or act as a natural mold determent.  

4. Baking soda

Used with water and vinegar or with water alone, baking soda is impressive at taking out mold naturally. Dissolve some a handful of baking powder into a water-and-vinegar solution or plain water and spray onto the troubled area. Allow the solution to sit in, then scrub clean and wipe using a damp cloth.

A naturally occurring disinfectant and incredibly mild, the baking powder in the solution will clear up the mold without leaving any scent.

5. RMR 86 mold remover

Not all of us prefer or trust the natural removers, and supposing you fall in this category; it’s most likely you prefer the strong chemical-based solutions. That said, we recommend the RMR 86 mold remover that delivers remarkable results.

This great product from RMR Solutions eradicates mildew and mold without tiresome sanding or scrubbing and is safe.

Here is a great review of RMR 86 mold stain remover to help you better grasp the effectiveness of the product.