Seven Floor Stripping Tools You Need
When you are ready to strip a waxed floor, you need to make sure that you have the appropriate tools. Stripping a floor a bit of patience and care. Plus, you cannot strip the floor using one or two tools. You want to bring the floor back to its original condition, and each of these seven tools will play a part in the process.
Dust Mop
You must dust mop the entire area before you get started. You will use a liquid solution to strip the original finish from the floor, and you do not want dust to be mixed in with a solution. The dust could get stuck the floor after the fact, or the dust could pool into a ball that creates a gunk that is very hard to remove from the floor.
Stripper Solution
The stripper solution you are using could come from a number of different companies. You can use the stripper solution you are accustomed to using, but you need to use something that you are comfortable with. If you are using a new stripper solution, you may need to test it in an inconspicuous area first.
Cold Water
You must dilute your stripper solution with cold water. Coldwater will not cause a chemical reaction before the solution is poured, and you will avoid damage to the flooring. If you are using the stripper solution by itself, you could damage the floors and strip the color from the tile.
Wet/Dry Vacuum
You will use a wet/dry vacuum to remove all of the solutions from the floor. You must give the solution 5-10 minutes to strip the floor completely. When you are removing the solution, you do not want to rub it into the tile. A vacuum will suck up all the water instantly, and you will be left with a damp floor that is easy to treat. Plus, a wet/dry vacuum will be easy to glide over the floor without scratching the clean tiles.
Floor Sweeper Pads
Floor sweeper pads are used to clean up the damp floor, and you must ensure that you have used a floor sweeper pads that is not too abrasive. You want to ensure the rest of the finish is removed, but you want to be as gentle as possible. You can test these pads in the corner of the room to make sure that they are not too harsh.
Cleaning Cloths
A cleaning cloth can be used to wipe down the floor when you are done with this process. You may choose to rinse the floor with cold water one more time before you wipe it down, but you want to wipe down the floor only after the water has been removing. Your cleaning cloth is very soft, and it will leave a nice finish on the floor that looks natural. Once you have removed all the excess water and debris, you are ready to add a new finish to the floor.
New Floor Finish
If you have worked with Absolute Floor Stripping Gold Coast, you likely want to add a new finish to the floor. You can choose any finishing product that you like, and that finish can be applied as soon as the floor is dry. If the floor is not dry, you will see water spots under the finish. Plus, you need to ensure that you put multiple coats of finish on the floor so that it will hold up for a long time. You can wait for quite a while before you need to strip the floor and start this process all over again.
Conclusion
When you are ready to strip your tile floors, you must follow the steps above to get the best results. You want to return the tiles to their original condition so that they are ready for a new coat of finish. If you do not strip the floors at regular intervals, they will build up gunk that is very hard to clean. Plus, the places that are worn the most will be obvious to you and all your guests. You can keep the floors cleaner when you use a stripping solution and the appropriate tools.
Images source
