How To Repair Your Garage Door

When it comes to the garage door, it does not open on one side like the typical doors of your house, they usually open from the bottom up. It can be a swinging door, vertical or sliding, which uses multiple joined sections that are supported by a tension mechanism of rails. This mechanism is the main reason why it automatically jumps upward once it opens and curls perfectly when the door is fully opened. But all the mechanisms are destined to fail at some time or another, so learning to repair garage doors is always necessary in the long term.

What part of the garage door mechanism is defective?

This is the first thing you should find out if your garage door is not working properly. One way to find out this is by opening or closing the door and observing the mechanism while the door is open.

First close the garage door so that the rails unwind from the mechanism. Check if the metal tracks are rolling smoothly. If the problem is in the mechanism itself, observe the elements that do not work properly, rearrange or replace the parts, and try to test the door again. If you notice that the rails are out of place, remove it carefully from the mechanism, and reinstall it again. Maybe you see small repairable dents in the rail, try putting them back in place with a mallet. Finally, if the rail is in poor condition and does not work regardless of what type of arrangement you make, then consider replacing it with a new set of rails. In this case, consider that Garage Door Repair should be done by a professional.

Maintenance

If you see that the nuts and bolts are in place and the rail is not very deformed, then probably the problem lies in the friction of the mechanical parts. Try to apply liquid lubricants to solve this problem. Apply the lubricant while the door is closed and the rail unrolled, this way it will be easier (and not dirty so much).

Try checking and see if there are mechanical parts that are loose. Be sure to adjust and rearrange each of these pieces appropriately and check the door again later. If you see that one side of the door is not working well, or is unbalanced due to loose or misplaced parts, be sure to reinstall these parts correctly. There are some parts that have become totally unusable over time (old hinges, very rusted locks). Replace these parts.

So, as you can see, there is virtually no need to replace the garage door as soon as it breaks, you can simply fix it on your own. You just have to see what is working wrong in the mechanism. Sometimes, it is the simplest mechanical problems that make your garage door malfunction. Otherwise, if you have in mind to find a Garage Door Repair Near Me you can opt for one time maintenance and learn the process for the next time.