How To Pressure Clean Your House
Are you planning to paint or repaint your house? Cleaning it will be the first step so as the paint can look good. Cleaning the paint will also allow the paint last longer. Using water and a piece of cloth can be tedious. The best option is pressure washing. This is using the water spray that has a very high velocity that cleans all the dirt and residues out of the exterior of your house. It can be used on any material without the fear of damage. You can also pressure wash your house once in a year to remove dust and dirt.
Using the pressure washing is not a simple task. Experts from Rhino Pressure Cleaning – http://www.rhinopressurecleaning.com.au/ have shared these steps – if you follow them keenly you will manage to do the cleaning effectively.
The things that you will need include:
- Drop cloths or plastic sheeting
- Duct tape
- Measuring cup
- House Cleaning detergent with mildew ide
- Bleach
- 5-gallon mixing bucket
- Garden sprayer
- Garden hose
- Safety goggles or safety rated sunglasses
- Pressure washer with 15 to 30-degree nozzles
- 6-foot to 12-foot extension wand
With these things, the steps to follow are:
1. Choose a pressure washer that is good for your house
Different materials will withstand different water pressure. The pressure of the spray ranges from 1,200 to 3,000 pounds per square inch (psi). a soft material such as aluminum or soft-grain wood will require a low pressure of between 1200 and 1500. Stronger materials can withstand a pressure of more than 2000. Also look for a washer that has the detergent dispenser.
2. Cover the exterior fixtures
Things like bulbs, landscaping scrub and plants need to be covered using the cloths or the plastic bags and hold them together using the duct tape.
3. Scrub the mildew
Using a brush scrub off the mildew that is visible from the surface you plan to pressure wash.
4. Mix the cleaning solutions
After scrubbing the mildew you are now ready to start washing. Mix four gallons of water with 1 pound of non-phosphate concentrated cleaner. Fill the pressure washer’s detergent and set up the washer. Locate the hose mount on the back of the pressure washer, and attach the garden hose to this mount as well as to the hose faucet on the outside of the house. When ready turn on the water.
5. Test the pressure of the water.
Hold the pipe far from the walls and move closer to the point you feel the water has enough pressure to remove the dirt but not so strong to a point of causing damage.
6. Clean your house
You will start from the top moving down. Spray the roofs’ overhangs and under-hangs plus the gutters at an angle of 45 degrees. Make sure to do it steadily, from side to side. Rinse the walls using plain water from the hosepipe and allow them to dry.
Cleaning your house regularly is recommended and you do not have to hire a cleaning company to come to do the cleaning for you. You can use the given steps and do it on your own. Ensure you avoid damages by choosing the correct pressure washer and avoiding using a lot of water pressure to spray the walls. Happy pressure washing!
