Factors To Consider Before Selecting The Right Strip Doors
Strip doors or plastic curtains are used for numerous industrial purposes. They find their applications in places like warehouses and factories. The main advantage of these doors is that they will give you the type of separation that is expected between any two sections at the same time; the flow between the sections will not be restricted. You can find various types of strip doors, and each one of these types is meant for specific purposes. This guide will assist you to walk through the factors that will help you decide the right kind of strip doors for you.
Temperature
The operating temperature condition is one of the main factors one should consider before choosing the type of clear strip doors. While you should find all types of physical conditions inside a building, the temperature is the foremost one. The thermal conductivity factor is significant to determine the quality of the material of the plastic curtains. Thus, take all the operating conditions in the given facility into account. You can find several variants of plastic curtains with a temperature range of negative 20F and positive 120 F. When you find a specific variant, look if it fits the temperature condition of your facility. There is a wide range of temperatures to consider and choose from.
Strip Doors : Maintenance
There will be heavy traffic passing through these curtains, especially in industrial places. That being the case, they will undergo wear and tear despite high durability factors. You must be able to repair these curtains and even replace them if needed. The roll type strip curtains are best used for modified purposes. You can avail rolls in different lengths ranging between 100′ and 350′. You can cut these rolls to custom sizes and use them. Especially if you need to replace certain pieces or parts of an arrangement that is already present, using the rolls is the best option. If certain parts of these curtains are damaged, then the entire door arrangement need not be replaced. You can even cut off the damaged section and substitute it. This way, the process is less expensive and more efficient.
Flammability
Safety is of prime importance in any industrial setup. These places are prone to fire, and you need to make sure that the curtain setup is resistant to fire. It is essential to use curtain strips that are made using high-quality materials so that the security factor is re-assured. You should also think about the Fire resistance code to find if the material is compliant. Since these areas are prone to such accidents, utmost care should be taken. Having the wrong type of plastic curtains can add to the flame in case of an accident and make the situation worse.
Strip Doors : Sizes
The first step to determine is the size of the strip curtains. If you are planning to get uniquely designed strip doors, the first step is to get the size estimations. The measurements of these doors must be precisely determined. Before you get the strips cut, you need to take care of traffic that passes through the entryway and comes out. It is possible to strip them into pieces of different widths.
The standard sizes are usually found in the range of 6″ and 8″. Some variations even go till 16″ too. You need to think about the type of traffic that passes and decide the width accordingly. The kind of material is a significant factor also. In case of frequent and heavy traffic, you need to have wide strips that are cut into equal sizes.
